Error catching is an important area to consider when creating Monte Carlo simulations. Sometimes, iterative algorithms will ‘fail to converge’, or otherwise crash for other reasons (e.g., sparse data). Moreover, errors may happen in unexpected combinations of the design factors under investigation, which can lead to abrupt termination of a simulation’s execution.
SimDesign makes managing errors much easier because the internal functions are automatically wrapped within try blocks, and therefore simulations will not terminate unexpectedly. This type of information is also collected in the final simulation object since it may be relevant to the writer that something unknown is going wrong in the code-base. Below we demonstrate what happens when errors are thrown and caught, and how this information is tracked in the returned object.
As usual, define the functions of interest.
library(SimDesign)
# SimFunctions(comments=FALSE)
Design <- createDesign(N = c(10,20,30))Generate <- function(condition, fixed_objects = NULL) {
ret <- with(condition, rnorm(N))
ret
}
Analyse <- function(condition, dat, fixed_objects = NULL) {
whc <- sample(c(0,1,2,3), 1, prob = c(.7, .20, .05, .05))
if(whc == 0){
ret <- mean(dat)
} else if(whc == 1){
ret <- t.test() # missing arguments
} else if(whc == 2){
ret <- t.test('invalid') # invalid arguments
} else if(whc == 3){
# throw error manually
stop('Manual error thrown')
}
# manual warnings
if(sample(c(TRUE, FALSE), 1, prob = c(.1, .9)))
warning('This warning happens rarely')
if(sample(c(TRUE, FALSE), 1, prob = c(.5, .5)))
warning('This warning happens much more often')
ret
}
Summarise <- function(condition, results, fixed_objects = NULL) {
ret <- c(bias = bias(results, 0))
ret
}The above simulation is just an example of how errors are tracked in SimDesign, as well as how to throw a manual error in case the data should be re-drawn based on the user’s decision (e.g., when a model converges, but fails to do so before some number of predefined iterations).
result <- runSimulation(Design, replications = 100,
generate=Generate, analyse=Analyse, summarise=Summarise)##
##
Design row: 1/3; Started: Wed Feb 1 15:04:13 2023; Total elapsed time: 0.00s
##
##
Design row: 2/3; Started: Wed Feb 1 15:04:13 2023; Total elapsed time: 0.09s
##
##
Design row: 3/3; Started: Wed Feb 1 15:04:13 2023; Total elapsed time: 0.17sprint(result)## # A tibble: 3 × 8
## N bias REPLICATIONS SIM_TIME COMPLETED SEED ERRORS WARNI…¹
## <dbl> <dbl> <int> <dbl> <chr> <int> <int> <int>
## 1 10 0.0611 100 0.0870 Wed Feb 1 15:04:13 … 1.14e9 53 59
## 2 20 0.0143 100 0.0780 Wed Feb 1 15:04:13 … 3.13e8 52 60
## 3 30 0.0179 100 0.0750 Wed Feb 1 15:04:13 … 8.66e8 42 56
## # … with abbreviated variable name ¹WARNINGSWhat you’ll immediately notice from this output object is that counts of the error and warning messages have been appended to the result object. This is useful to determine just how problematic the errors and warnings are based on their frequency alone. Furthermore, the specific frequency in which the errors/warnings occurred are also included for each design condition (here the t.test.default() error, where no inputs were supplied, occurred more often than the manually thrown error as well as the invalid-input error) after extracting and inspecting SimExtract(results, what = 'errors') and SimExtract(results, what = 'warnings').
SimExtract(result, what = 'errors')## N ERROR: Error in t.test.default("invalid") : not enough 'x' observations\n
## 1 10 12
## 2 20 9
## 3 30 10
## ERROR: Error in t.test.default() : argument "x" is missing, with no default\n
## 1 31
## 2 38
## 3 25
## ERROR: Manual error thrown\n
## 1 10
## 2 5
## 3 7Finally, SimDesign has a built-in safety feature controlled by with max_errors argument to avoid getting stuck in infinite redrawing loops. By default, if more than 50 errors are consecutively returned then the simulation condition will be halted, and a warning message will be printed to the console indicating the last observed fatal error. These safety features are built-in because too many consecutive stop() calls generally indicates a major problem in the simulation code which should be fixed before continuing. However, when encountering fatal errors in a given simulation condition the remainder of the simulation experiment will still be executed as normal, where for the problematic conditions combinations NA placeholders will be assigned to these rows in the final output object. This is so that the entire experiment does not unexpectedly terminate due to one or more problematic row conditions in Design, and instead these conditions can be inspected and debugged at a later time. Of course, if inspecting the code directly, the simulation could be manually halted so that these terminal errors can be attended to immediately (e.g., using Ctrl + c, or clicking the ‘Stop’ icon in Rstudio).
If errors occur too often (but not in a fatal way) then the respective design conditions should either be extracted out of the simulation or further inspected to determine if they can be fixed (e.g., providing better starting values, increasing convergence criteria/number of iterations, etc). The use of the debugging features can also be useful to track down issues as well. For example, manually wrap the problematic functions in a try() call, and add the line if(is(object, 'try-error')) browser() to jump into the location/replication where the object unexpectedly witnessed an error. Jumping into the exact location where the error occurred will greatly help you determine what exactly went wrong in the simulation state, allowing you to quickly locate and fix the issue.
An alternative approach to locating errors in general is to use information stored within the SimDesign objects at the time of completion. By default, all .Random.seed states associated with errors are stored within the final object, and these can be extracted using the SimExtract(..., what='error_seeds') option. This function returns a data.frame object with each seed stored column-wise, where the associated error message is contained in the column name itself (and allowed to be coerced into a valid column name to make it easier to use the $ operator). For example,
seeds <- SimExtract(result, what = 'error_seeds')
head(seeds[,1:3])## # A tibble: 6 × 3
## Design_row_1.1..Error.in.t.test.default.....argument..x..is.…¹ Desig…² Desig…³
## <int> <int> <int>
## 1 10403 1.04e4 1.04e4
## 2 624 2.1 e1 6.5 e1
## 3 -159038368 -2.31e8 -2.31e8
## 4 1905303777 2.04e8 2.04e8
## 5 -371375826 1.16e9 1.16e9
## 6 -1012234281 5.49e8 5.49e8
## # … with abbreviated variable names
## # ¹Design_row_1.1..Error.in.t.test.default.....argument..x..is.missing..with.no.default.,
## # ²Design_row_1.2..Manual.error.thrown.,
## # ³Design_row_1.3..Error.in.t.test.default.....argument..x..is.missing..with.no.default.Given these seeds, replicating an exact error can be achieved by a) extracting a single column into an integer vector, and b) passing this vector to the load_seed input. For example, replicating the first error message can be achieved as follows, where it makes the most sense to immediately go into the debugging mode via the debug inputs.
Note: It is important to manually select the correct Design row using this error extraction approach; otherwise, the seed will clearly not replicate the exact problem state.
picked_seed <- seeds$Design_row_1.1..Error.in.t.test.default..invalid.....not.enough..x..observations.
runSimulation(Design[1,], replications = 100, load_seed=picked_seed, debug='analyse',
generate=Generate, analyse=Analyse, summarise=Summarise)The .Random.seed state will be loaded at this exact state, and will always be related at this state as well (in case c is typed in the debugger, or somehow the error is harder to find while walking through the debug mode). Hence, users must type Q to exit the debugger after they have better understood the nature of the error message first-hand.