IETF 80 Proceedings

Introduction  |  Area, Working Goup & BoF Reports  |  Plenaries  |  Training  |  Internet Research Task Force

Diameter Maintenance and Extensions (dime) (WG)

Minutes  | Audio Archives  |  Jabber Logs  |  Mailing List Archives

Additional information is available at tools.ietf.org/wg/dime

Chair(s):

Operations and Management Area Director(s):

Operations and Management Area Advisor:

Meeting Slides

Internet-Drafts:

Request for Comments:

Charter (as of 2010-08-19)

The Diameter Maintenance and Extensions WG will focus on maintenance
and extensions to the Diameter protocol required to enable its use for
authentication, authorization, accounting and provisioning in network
access as well as for other applications environments
(e.g., IP telephony, mobility).

The IETF has completed work on the Diameter Base protocol and is
working on revising the base protocol specification. There is on-going
work on defining RADIUS extensions and the DIME WG will ensure
that work done in RADEXT is also available for Diameter.

The DIME working group plains to address the following items:

- Maintaining and/or progressing, along the standards track, the
Diameter Base protocol and Diameter Applications. This includes
extensions to Diameter Base protocol that can be considered as enhanced
features or bug fixes, such NAI routing or capability update extensions.


- Diameter application design guideline. This document will provide
guidelines for design of Diameter extensions. It will detail when to
consider reusing an existing application and when to develop a new
application.

- Diameter QoS extensions. This work focuses on extensions to
Diameter to support QoS information to be authorized and provisioned
in AAA deployments.

- Protocol extensions for the management of Diameter entities. This work

focuses on the standardization of Management Information Bases (MIBs)
to configure Diameter entities (such as the Diameter Base protocol or
Diameter Credit Control nodes). The usage of other management protocols
for configuring Diameter entities may be future work within the group.

- Diameter extensions for mobility protocols, such as Mobile IPv6 and
Proxy Mobile IPv6. Diameter extensions to support handover keying
developed in the HOKEY WG are part of this effort.

- New Diameter applications, such as the Diameter NAT control
application.
This group will also conduct work on new Diameter applications with
a Diameter application for configuring NATs as the first item.

Additionally, AAA systems require interoperability in order to work.
The working group, along with the AD, will need to evaluate
any potential extensions and require verification that the proposed
extension is needed. Coordination with other IETF working groups
and other SDOs will used to ensure this.

Goals and Milestones:

Done  Submit the following two Diameter Mobility documents to the IESG for consideration as a Proposed Standards:* 'Diameter Mobile IPv6: Support for Home Agent to Diameter Server Interaction' * 'Diameter Mobile IPv6: Support for Network Access Server to Diameter Server Interaction'
Done  Submit 'Diameter API' to the IESG for consideration as an Informational RFC
Done  Submit 'Quality of Service Parameters for Usage with Diameter' to the IESG for consideration as a Proposed Standard.
Done  Submit 'Diameter QoS Application' to the IESG for consideration as a Proposed Standard
Done  Submit 'Diameter Support for EAP Re-authentication Protocol' as DIME working group item
Done  Submit 'Diameter User-Name and Realm Based Request Routing Clarifications' as DIME working group item
Done  Submit 'Diameter Proxy Mobile IPv6' as DIME working group item
Done  Submit 'Quality of Service Attributes for Diameter' to the IESG for consideration as a Proposed Standard
Done  Submit 'Diameter Proxy Mobile IPv6' to the IESG for consideration as a Proposed Standard
Done  Submit 'Diameter User-Name and Realm Based Request Routing Clarifications' to the IESG for consideration as a Proposed Standard
Done  Submit 'Diameter NAT Control Application' as DIME working group item
Done  Submit 'Diameter Capabilities Update' as DIME working group item
Done  Submit ' Diameter Credit Control Application MIB' to the IESG for consideration as an Informational RFC
Done  Submit 'Diameter Base Protocol MIB' to the IESG for consideration as an Informational RFC
Done  Submit 'Diameter Capabilities Update' to the IESG for consideration as a Proposed Standard
Done  Submit 'Diameter Extended NAPTR' as DIME working group item
Done  Submit 'Realm-Based Redirection In Diameter' as DIME working group item
Done  Submit 'Diameter Support for Proxy Mobile IPv6 Localized Routing' as DIME working group item
Done  Submit 'Diameter Attribute-Value Pairs for Cryptographic Key Transport' as DIME working group item
Done  Submit 'Diameter Priority Attribute Value Pairs' as DIME working group item
Done  Submit 'Diameter IKEv2 PSK' as DIME working group item
Aug 2010  Submit Revision of 'Diameter Base Protocol' to the IESG for consideration as a Proposed Standard
Aug 2010  Submit 'Diameter Attribute-Value Pairs for Cryptographic Key Transport' to the IESG for consideration as a Proposed Standard
Aug 2010  Submit 'Diameter Priority Attribute Value Pairs' to the IESG for consideration as a Proposed Standard
Aug 2010  Submit Revision of 'Diameter Network Access Server Application - RFC 4005bis' as DIME working group item
Sep 2010  Submit 'Diameter Application Design Guidelines' to the IESG for consideration as a BCP document
Sep 2010  Submit 'Diameter NAT Control Application' to the IESG for consideration as a Proposed Standard
Sep 2010  Submit 'Realm-Based Redirection In Diameter' to the IESG for consideration as a Proposed Standard
Sep 2010  Submit 'Diameter IKEv2 PSK' to the IESG for consideration as a Proposed Standard
Oct 2010  Submit 'Diameter Extended NAPTR' to the IESG for consideration as a Proposed Standard
Nov 2010  Submit 'Diameter Support for Proxy Mobile IPv6 Localized Routing' to the IESG for consideration as a Proposed Standard
Jul 2011  Submit 'Diameter Support for EAP Re-authentication Protocol' to the IESG for consideration as a Proposed Standard
Sep 2011  Submit Revision of 'Diameter Network Access Server Application - RFC 4005bis' to the IESG for consideration as a Proposed Standard

Internet SocietyAMSHome - Tools Team - Datatracker - Web Site Usage Statistics - IASA - IAB - RFC Editor - IANA - IRTF - IETF Trust - ISOC - Store - Contact Us
Secretariat services provided by Association Management Solutions, LLC (AMS).
Please send problem reports to: ietf-action@ietf.org.