| Internet-Draft | DMALMO | April 2024 |
| Palmero, et al. | Expires 26 October 2024 | [Page] |
This document includes a data model for assets lifecycle management and operations. The primary objective of the data model is to measure and improve the network operators' experience along the lifecycle journey, from technical requirements and technology selection through renewal, including the end of life of an asset.¶
This model is based on the information model introduced in "Asset Lifecycle Management and Operations: A Problem Statement" (ALMO) [I-D.draft-palmero-opsawg-ps-almo-00] IETF draft.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 26 October 2024.¶
Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
The dynamicity in "where", "how" and "who" uses an asset introduces challenges for both lifecycle and adoption management of the assets. These challenges and the motivation to fix the problems are shown with some examples in the companion draft "Asset Lifecycle Management and Operations: A Problem Statement" (ALMO) [I-D.draft-palmero-opsawg-ps-almo-00] IETF draft. Taking inspiration from the use cases and the Information Model given in Section 5 of the companion draft, we attempt to standardize some of the associations (with the data attributes) between the entities in the Information model. The YANG data models specified in this draft are subject to modification and refinement subsequent to the IVY Working Group's ratification of a stable iteration of the core inventory data models. Please note, the data model presented in the draft can be extended as per the expandability provided by the Information Model using the entity Future Expansion.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
The document makes use of the following terms:¶
Asset: refers to hardware, software, applications, or services. An asset can be physical or virtual. The granularity of what constitutes an asset is deployment and implementation specific.¶
Features: are options or functional capabilities offered by an asset.¶
Entitlement: commonly implemented as license; it represents the rights obtained by the user, that allow them to access and utilize certain capabilities of the asset, including a feature or set of features.¶
Lifecycle Management and Operations (LMO) connects to:¶
Usage: refers to how an asset is being used (e.g., which features are used).¶
Abbreviations:¶
The motivation behind ALMO is to address the existing gap that network operators and business architects face in measuring and producing data related to various issues. This includes challenges such as unactivated entitlements, underutilized features, incident resolution, virtualized asset lifecycle events, DevOps deployment, and supply chain management.¶
By implementing ALMO, developer organizations can optimize their features by identifying and deprecating infrequently used features. They can also focus on widely deployed assets and improve usability and integration. ALMO provides a structured approach for users to provide feedback about an asset, enabling developers to assess the impact of potential deficiencies based on user feedback.¶
Overall, ALMO aims to bridge the gap in data measurement and production, helping operators and business architects improve asset management, optimize features, and gather valuable user feedback for continuous improvement.¶
DMALMO offers a common data model to implement ALMO data.¶
Based on the ALMO IETF draft, assets can be characterized by their features, entitlements, and other attributes. Features represent the specific capabilities or functionalities of an asset. Entitlements, on the other hand, are related to asset usage and determine the level of access granted to users for utilizing the features. This implies that users have the necessary rights or licenses to use the asset and its associated features.¶
Entitlements can be complex to model as they vary in coverage and limitations. Some entitlements cover all features, while others target specific ones. For example, advanced or additional licenses may be required to access certain features like "MPLS-EVPN".¶
It is common in the industry to have tables that outline the entitlements and the features they cover, enabling users to understand their access based on entitlements. Some entitlements also impose restrictions on feature usage, such as limiting the number of users or CPUs.¶
The DMALMO model does not aim to provide a catalog of features and entitlements, but rather provides an inventory with focus on connecting features and entitlements to assets and tracking their usage. While it is possible to have multiple usage limits, the model may not support interrelating them. For instance, the statement "Entitlement covers up to N CPUs if you have more than X users, if not then M CPUs" may not be supported, but "Entitlement covers up to N CPUs and up to X users" is supported.¶
The usage aspect is particularly relevant in business use cases as it helps understand how to effectively utilize an asset. It provides insights into asset usage and highlights the importance of tracking it. While there may be other models addressing different aspects of an asset's lifecycle, the usage model serves a unique purpose by specifically focusing on practical utilization. Therefore, it is not redundant with other models and offers valuable insights into asset usage.¶
The different modules included in DMALMO are:¶
Aggregated Assets Module¶
In the context of ALMO, the Asset module represents specific entity, that can include various elements such as hardware, software, virtualized components, or even services. The assets module can be linked to specific network inventory and can also augment certain attributes that might be required for the implementation of a specific use case.¶
Entitlements Module¶
Entitlement module defines the level of access or permission granted to a user or entity to utilize specific features, functionalities, or resources associated with an asset. It represents the rights or licenses obtained by the user that allow them to access and utilize certain capabilities of the asset.¶
Features Module¶
Feature module includes various attributes and relationships that describe the characteristics, properties, and associations of the feature within a specific context. A well-defined feature enhances the asset's value, differentiates it from others, and meets the requirements and expectations of users.¶
Usage Module¶
The Usage model of a feature includes various elements that capture information about how the feature is utilized within the asset.¶
As part of the ALMO future extension modules, DMALMO considers:¶
Where the Event Report module includes various components that capture information about specific events or incidents that occur within ALMO related entities. And the Organization and User Modules encompass various components to capture information about users and organizations and their relationship to assets, features and/or entitlements.¶
This specification uses [RFC9179], [RFC9472] module: ietf-almo-assets¶
augment /ietf-almo:almos/ietf-almo:almo/ietf-almo:inst:
+--rw role? identityref
+--rw aggregation? boolean
+--rw number-of-instances? uint32
+--rw platform-dependency-os? identityref
+--rw install-location
| +--rw geo-location
| +--rw reference-frame
| | +--rw alternate-system? string {alternate-systems}?
| | +--rw astronomical-body? string
| | +--rw geodetic-system
| | +--rw geodetic-datum? string
| | +--rw coord-accuracy? decimal64
| | +--rw height-accuracy? decimal64
| +--rw (location)?
| | +--:(ellipsoid)
| | | +--rw latitude? decimal64
| | | +--rw longitude? decimal64
| | | +--rw height? decimal64
| | +--:(cartesian)
| | +--rw x? decimal64
| | +--rw y? decimal64
| | +--rw z? decimal64
| +--rw velocity
| | +--rw v-north? decimal64
| | +--rw v-east? decimal64
| | +--rw v-up? decimal64
| +--rw timestamp? yang:date-and-time
| +--rw valid-until? yang:date-and-time
+--rw deployment-mode? identityref
+--rw activation-date? yang:date-and-time
+--rw software-version? string
+--ro hotfixes
| +--ro hostfix* []
| +--ro version? identityref
| +--ro order? uint8
+--rw software-type? string
+--rw sign-of-life-timestamp? yang:date-and-time
+--rw tags? string
¶
module: ietf-almo-entitlements
augment /ietf-almo:almos/ietf-almo:almo/ietf-almo:inst:
+--rw uid? string
+--rw state? ietf-almo-common:entitlement-state-t
+--rw renewal-profile
| +--rw activation-date? yang:date-and-time
| +--rw expiration-date? yang:date-and-time
+--rw parent-entitlement
| +--rw almo-class? -> /ietf-almo:almos/almo/almo-class
| +--rw id? -> /ietf-almo:almos/almo[ietf-almo:almo-class=current()/../almo-class]/inst/id
+--rw entitlement-attachements
+--rw entity
| +--rw organizations
| +--rw organization* [almo-class id]
| +--rw almo-class -> /ietf-almo:almos/almo/almo-class
| +--rw id -> /ietf-almo:almos/almo[ietf-almo:almo-class = current()/../almo-class]/inst/id
+--rw assets
+--rw assets
+--rw asset* [almo-class id]
+--rw almo-class -> /ietf-almo:almos/almo/almo-class
+--rw id -> /ietf-almo:almos/almo[ietf-almo:almo-class = current()/../almo-class]/inst/id
augment /ietf-almo:almos/ietf-almo:almo/ietf-almo:inst/ietf-almo-feature:features/ietf-almo-feature:feature:
+--ro entitlements-info
+--ro entities-entitlement-info* []
+--ro entity-entitlement-info
| +--ro organizations
| +--ro organization* [almo-class id]
| +--ro almo-class -> /ietf-almo:almos/almo/almo-class
| +--ro id -> /ietf-almo:almos/almo[ietf-almo:almo-class = current()/../almo-class]/inst/id
+--ro entitlements
| +--ro entitlement* [almo-class id]
| +--ro almo-class -> /ietf-almo:almos/almo/almo-class
| +--ro id -> /ietf-almo:almos/almo[ietf-almo:almo-class = current()/../almo-class]/inst/id
+--ro entitled? boolean
+--ro infriges? boolean
+--ro in-use? boolean
+--ro entitlement-limit
+--ro users
| +--ro value? uint32
| +--ro maximum? uint32
+--ro cpus
| +--ro value? uint32
| +--ro maximum? uint32
+--ro bandwidth
+--ro value? decimal64
+--ro maximum? decimal64
¶
module: ietf-almo-feature
augment /ietf-almo:almos/ietf-almo:almo/ietf-almo:inst:
+--rw features
+--rw feature* [almo-class id]
+--rw almo-class -> /ietf-almo:almos/almo/almo-class
+--rw id -> /ietf-almo:almos/almo[ietf-almo:almo-class = current()/../almo-class]/inst/id
augment /ietf-almo:almos/ietf-almo:almo/ietf-almo:inst:
+--rw name? string
+--rw summary? string
+--rw category? string
+--rw entitlement? string
+--rw first-available-version? string
+--ro backported-versions
| +--ro backported-version* []
| +--ro version? identityref
+--rw scope? identityref
+--rw config-options* [id]
| +--rw id string
| +--rw name? string
| +--rw summary? string
| +--rw characteristic* [id]
| +--rw id string
| +--rw name? string
| +--rw value? string
+--rw asset
| +--rw almo-class? -> /ietf-almo:almos/almo/almo-class
| +--rw id? -> /ietf-almo:almos/almo[ietf-almo:almo-class = current()/../almo-class]/inst/id
+--rw subfeatures
+--rw subfeature* [almo-class id]
+--rw almo-class -> /ietf-almo:almos/almo/almo-class
+--rw id -> /ietf-almo:almos/almo[ietf-almo:almo-class = current()/../almo-class]/inst/id
¶
module: ietf-almo-usage
augment /ietf-almo:almos/ietf-almo:almo/ietf-almo:inst:
+--rw feature
| +--rw almo-class? -> /ietf-almo:almos/almo/almo-class
| +--rw id? -> /ietf-almo:almos/almo[ietf-almo:almo-class = current()/../almo-class]/inst/id
+--rw name? string
+--rw summary? string
+--rw uri? string
+--rw deployment-mode? identityref
+--rw scope? identityref
+--rw activation-status? string
+--rw instances? uint32
+--rw timestamp? yang:date-and-time
+--rw count? uint32
+--rw frequency* [name]
| +--rw name string
| +--rw type-freq? string
| +--rw value? yang:counter64
+--rw resource-consumption* [id]
+--rw id string
+--rw name? string
+--rw summary? string
+--rw characteristic* [id]
+--rw id string
+--rw name? string
+--rw unit? string
+--rw value? yang:counter64
+--rw value-max? yang:counter64
¶
module: ietf-almo-event-report
augment /ietf-almo:almos/ietf-almo:almo/ietf-almo:inst:
+--rw id? string
+--rw title? string
+--rw summary? string
+--rw severity? string
+--rw status? string
+--rw created? yang:date-and-time
+--rw last_updated? yang:date-and-time
+--rw capability? string
+--rw technology? string
+--rw subtechnology? string
+--rw problem-type? string
+--rw resolution? string
+--rw owner? string
+--rw support-engineer? string
+--rw asset
| +--rw almo-class? -> /ietf-almo:almos/almo/almo-class
| +--rw id? -> /ietf-almo:almos/almo[ietf-almo:almo-class = current()/../almo-class]/inst/id
+--rw feature
| +--rw almo-class? -> /ietf-almo:almos/almo/almo-class
| +--rw id? -> /ietf-almo:almos/almo[ietf-almo:almo-class = current()/../almo-class]/inst/id
+--rw contract-number? string
¶
module: ietf-almo-organization
augment /ietf-almo:almos/ietf-almo:almo/ietf-almo:inst:
+--rw address? string
+--rw department? boolean
¶
module: ietf-almo-user
augment /ietf-almo:almos/ietf-almo:almo/ietf-almo:inst:
+--rw billing-account? uint32
+--rw represents
| +--rw almo-class? -> /ietf-almo:almos/almo/almo-class
| +--rw id? -> /ietf-almo:almos/almo[ietf-almo:almo-class = current()/../almo-class]/inst/id
+--rw authority? enumeration
+--rw email? string
augment /ietf-almo:almos/ietf-almo:almo/ietf-almo:inst/ietf-almo-entitlements:entitlement-attachements/ietf-almo-entitlements:entity:
+--rw users
+--rw users* [almo-class id]
+--rw almo-class -> /ietf-almo:almos/almo/almo-class
+--rw id -> /ietf-almo:almos/almo[ietf-almo:almo-class = current()/../almo-class]/inst/id
augment /ietf-almo:almos/ietf-almo:almo/ietf-almo:inst/ietf-almo-feature:features/ietf-almo-feature:feature/ietf-almo-entitlements:entitlements-info/ietf-almo-entitlements:entities-entitlement-info/ietf-almo-entitlements:entity-entitlement-info:
+--ro users
+--ro users* [almo-class id]
+--ro almo-class -> /ietf-almo:almos/almo/almo-class
+--ro id -> /ietf-almo:almos/almo[ietf-almo:almo-class = current()/../almo-class]/inst/id
¶
<CODE BEGINS> file "ietf-almo-common@2023-10-23.yang"
module ietf-almo-common {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-almo-common";
prefix ietf-almo-common;
organization
"IETF OPSA (Operations and Management Area) Working Group";
contact
"WG Web: <https://datatracker.ietf.org/wg/opsawg/>
WG List: <mailto:opsawg@ietf.org>
Editor: Marisol Palmero
<mailto:mpalmero@cisco.com>
Editor: Josh Suhr
<mailto:josuhr@cisco.com>
Editor: Sudhendu Kumar
<mailto:skumar23@ncsu.edu>";
description
"This YANG module defines a collection of useful data types
and identity for Lifecycle Management and Operations (LMO).
Copyright (c) 2021 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject to
the license terms contained in, the Simplified BSD License set
forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(https://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX
(https://www.rfc-editor.org/info/rfcXXXX); see the RFC itself
for full legal notices.";
revision 2023-10-23 {
description
"Renamed all references from LMO to ALMO. Refer to
DMLMO draft";
reference
"RFC XXXX: ALMO YANG Model";
}
typedef entitlement-id-t {
type string;
description
"Entitlement ID Type";
}
typedef entitlement-model-t {
type enumeration {
enum perpetual {
description
"Perpetual entitlement";
}
enum subscription {
description
"Subscription entitlement";
}
enum usage-based {
description
"Usage-based entitlement";
}
enum other {
description
"Undefined entitlement type";
}
}
description
"Entitlement Model Type";
}
identity entitlement-buying-program-t {
description
"Entitlement Buying Program that contains the plan to generate
revenue for specific asset";
}
identity enterprise-agreement {
base entitlement-buying-program-t;
description
"Enterprise Agreement";
}
identity managed-service-entitlement-agreement {
base entitlement-buying-program-t;
description
"Managed Service Entitlement Agreement";
}
identity service-provider-network-agreement {
base entitlement-buying-program-t;
description
"Service Provider Network Agreement";
}
identity collab-active-user {
base entitlement-buying-program-t;
description
"Collaboration Active User";
}
identity service-full-coverage {
base entitlement-buying-program-t;
description
"Service Full-Coverage";
}
identity offer-type-t {
description
"License Offer Type, part of the plan to generate revenue
for specific asset";
}
identity perpetual-software {
base offer-type-t;
description
"Perpetual softwar gives the user the right to use the
program indefinitely";
}
identity standalone-hardware {
base offer-type-t;
description
"Standalone hardware is able to function independently
of other hardware";
}
identity on-premise-software-subscription {
base offer-type-t;
description
"On-Premise software subscription, relates to a temporary
on-prem licencing model, allowing users to pay a per user
fee";
}
identity cloud-software-saas-subscription {
base offer-type-t;
description
"Cloud Software (SaaS) subscription is a service busines
model where the user is entitled to use the cloud software
for a specific time period";
}
identity third-party-software {
base offer-type-t;
description
"It includes licenses, entitlements, agreements, obligations
or other commitment under which the user can use the asset
not directly sold by the manufacturer";
}
identity flex-cloud-prem-subscription {
base offer-type-t;
description
"Flex Cloud-Prem subscription allows software vendors to
limit the number of entitlements for the use of the specific
asset";
}
typedef purchase-order-t {
type string;
description
"License purchase order number";
}
typedef entitlement-state-t {
type enumeration {
enum inactive {
description
"Inactive State";
}
enum active {
description
"Active State";
}
enum unknown {
description
"Unknown State";
}
}
description
"Entitlement State Type";
}
typedef asset-id {
type string;
description
"Asset ID Type";
}
typedef vendor-id {
type enumeration {
enum cisco {
description
"Vendor-id is Cisco";
}
enum other {
description
"Vendor-id is not determined";
}
}
description
"Vendor identifier";
}
identity asset-type {
description
"type of the asset: hardware, software, software cloud, ...";
}
identity hw {
base asset-type;
description
"Hardware refers to any physical device";
}
identity sw {
base asset-type;
description
"Software refers to a collection of code installed on a
hardware asset";
}
identity sw-cloud {
base asset-type;
description
"Cloud-based software, that allows users access to software
application that run on a shared computing resources via
Internet";
}
identity nfv {
base asset-type;
description
"irtual assets, as a separate type to connect with NFV practice";
}
identity phone {
base asset-type;
description
"Mobile telephone or a handheld two-way communication device
over a cellular network.";
}
identity other {
base asset-type;
description
"Different or additional type not specified as part of another
defined asset-type.";
}
identity asset-subtype {
description
"subtype of the asset: router, switch, wireless,
controller, ...";
}
identity router {
base asset-subtype;
description
"Network connecting device. It operates at layer-3 of the OSI
model.";
}
identity switch {
base asset-subtype;
description
"Network connecting device. It operates at layer-2(Data Link
Layer) of the OSI model.";
}
identity wireless {
base asset-subtype;
description
"Network connecting device. It creates a wireless local area
network. It connects to a wired router, switch, or hub via an
Ethernet cable, and projects a Wi-Fi signal to a designated
area";
}
identity controller {
base asset-subtype;
description
"Centralized device in the network which is used in combination
with network connection devices, when there is a need to manage
them in large quantities.";
}
identity board {
base asset-subtype;
description
"Electronic circuit board in an asset which interconnects
another hardware assets attached to it.";
}
identity p-supply {
base asset-subtype;
description
"Power supply, as it might have independent identity.";
}
identity transceiver {
base asset-subtype;
description
"Device that is both a transmitter and a receiver. Usually
it's in a single device.
This is commonly used as a modular network interface";
}
identity others {
base asset-subtype;
description
"Different or additional type not specified as part of another
defined asset-subtype. To be considered a few specific subtype
of assets related to: 3GPP, BBF, TMF, I2NSF (and security in
general), PCE, etc";
}
identity version {
description
"Base identity for all version types";
}
identity version-sw {
base version;
description
"Version release of the operating system that runs on the
asset";
}
identity platform-dependency-os {
description
"Operating system that creates an environment for the asset
to get deployed. Enum of options covering OS platform
dependency.";
}
identity linux {
base platform-dependency-os;
description
"UNIX like operating system";
}
identity windows {
base platform-dependency-os;
description
"Windows operating system";
}
identity macOS {
base platform-dependency-os;
description
"Mac operating system develop by Apple, Inc.";
}
identity darwin {
base platform-dependency-os;
description
"Open-source Unix-like operating system first released by Apple
Inc.";
}
identity ubuntu {
base platform-dependency-os;
description
"Linux distribution, used in desktop distribution";
}
identity red-hat {
base platform-dependency-os;
description
"Red Hat Enterprise Linux, released in multiple server and
desktop versions";
}
// NEED to extend and include iOS, Android, etc.;
identity role {
description
"What the role of a given device/component is in the network.
This attribute normally will be configured on the specific
component during setup. This attribute normally will be
configured on the specific component during setup";
}
identity border-router {
base role;
description
"Router that provides connectivity between interior and
exterior network routers or to the cloud";
}
identity access {
base role;
description
"Router that provides access to a larger communication network
of some sort.";
}
identity control-plane {
base role;
description
"Network component that controls how data packets are
forwarded";
}
identity edge {
base role;
description
"Router that provides an entry point into enterprise or service
provider core networks";
}
identity core {
base role;
description
"Component part of the high-speed backbone of the network. It
provides fast and efficient data transport, excluding 3GPP";
}
identity ran {
base role;
description
"RAN links user equipment, such as a cellphone, computer or
any remotely controlled machine, over a fiber or wireless
backhaul connection. That link goes to the core network, which
manages subscriber information, location and more.";
}
identity datacenter {
base role;
description
"Component placed in the data center, mantaining and housing
back-end IT system and data stores";
}
identity branch {
base role;
description
"Router in a remote branch of an enterprise's network";
}
identity deployment-mode {
description
"This attribute will denote the configured deployment mode
for the asset and features, if applicable; e.g.,
High Availability(HA) or Faiover cluster, virtual appliance,
etc.";
}
identity primary {
base deployment-mode;
description
"Asset or featurs that support critical applications to
minimize system downtime, to achieve high availabiilty or
failover";
}
identity secondary {
base deployment-mode;
description
"Redundant asset or feature, that is triggered when the
primary encounters performance issues, to achieve high
availability or failover";
}
identity cloud {
base deployment-mode;
description
"Especially it refers to remote, distributed and shared asset
resources (i.e. data storage, computing power, etc.), which
are hooked together and meant to operate as a single
ecosystem.";
}
identity virtual-appliance {
base deployment-mode;
description
"pre-configured virtual machine image, ready to run on a
hypervisor";
}
identity container {
base deployment-mode;
description
"Standard unit of software that packages up code and all its
dependencies so the application runs quickly and reliably from
one computing environment to another";
}
identity undeployed {
base deployment-mode;
description
"it refers to an asset that is undeployed";
}
identity metric-type {
description
"Specify the different type of metrics, i.e accumulated-count,
average-count, last-count, high-water mark count, low-water
mark count" ;
}
identity feature-scope {
description
"Optional tag that could apply to any usage feature, so that
if there are multiple dimensions of reporting that need to
be accommodated (i.e., report feature usage by 'site')";
}
identity site {
base feature-scope;
description
"Single location, part of the network";
}
identity network {
base feature-scope;
description
"scope limited to the networking assets";
}
typedef feature-usage-type {
type enumeration {
enum none {
description
"No Usage";
}
enum low {
description
"Usage meeting the Low Threshold";
}
enum medium {
description
"Usage meeting the Medium Threshold";
}
enum high {
description
"Usage meeting the High Threshold";
}
// NEED to elaborate more on this list, based on use case
// validation
}
description
"feature usage % 0-25-50-75-100";
}
identity almo-class {
description "Base identity for classes of LMOs";
}
<CODE ENDS>¶
<CODE BEGINS> file "ietf-almo@2023-10-23.yang"
module ietf-almo {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-almo";
prefix ietf-almo;
import ietf-almo-common {
prefix ietf-almo-common;
}
import ietf-yang-types {
prefix yang;
}
organization
"IETF OPSA (Operations and Management Area) Working Group";
contact
"WG Web: <https://datatracker.ietf.org/wg/opsawg/>
WG List: <mailto:opsawg@ietf.org>
Editor: Jan Lindblad
<mailto:jlindbla@cisco.com>
Editor: Marisol Palmero
<mailto:mpalmero@cisco.com>";
description
"This YANG module add the flexibility to define its own
and extensible set of almo classes.
Copyright (c) 2021 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject to
the license terms contained in, the Simplified BSD License set
forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(https://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX
(https://www.rfc-editor.org/info/rfcXXXX); see the RFC itself
for full legal notices.";
revision 2023-10-23 {
description
"Renamed all references from LMO to ALMO. Refer to
DMLMO draft";
reference
"RFC XXXX: ALMO YANG Model";
}
container almos {
//config false; //temporarily commented out for easy testing
description
"Container that includes instances for all types of datasets
which are part of DMLMO";
list almo {
key almo-class;
description
"list that includes the instances for all DMLMO datasets";
leaf almo-class {
type identityref {
base ietf-almo-common:almo-class;
}
description
"almo-class defining the type of instance";
}
list inst {
key id;
description
"defines the specific instance";
leaf id {
type string;
description
"Identifies the instance";
}
container parent {
description
"identifies the hierarchy structure for a given instance";
leaf almo-class {
type leafref {
path /almos/almo/almo-class;
}
description
"almo-class that defines the parent type of instance";
}
leaf id {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo[ietf-almo:almo-class"
+ "=current()/../almo-class]/ietf-almo:inst/ietf-almo:id";
}
description
"identifies the parent type of instance";
}
}
container capture-info {
// Moved capture-info to the instance level, as
// asset/... data will generally be collected
// from one source at one time.
description
"Capture information for this data";
leaf collected-on {
type yang:date-and-time;
description
"Time at which this data was collected";
}
leaf collected-from {
type string;
description
"Identifier for original source of this data";
}
}
}
}
}
<CODE ENDS>¶
<CODE BEGINS> file "ietf-almo-entitlements@2023-10-23.yang"
module ietf-almo-entitlements {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-almo-entitlements";
prefix ietf-almo-entitlements;
import ietf-yang-types {
prefix yang;
}
import ietf-almo-common {
prefix ietf-almo-common;
}
import ietf-almo {
prefix ietf-almo;
}
import ietf-almo-assets {
prefix ietf-almo-asset;
}
import ietf-almo-feature {
prefix ietf-almo-feature;
}
import ietf-almo-organization {
prefix ietf-almo-organization;
}
organization
"IETF OPSA (Operations and Management Area) Working Group";
contact
"WG Web: <https://datatracker.ietf.org/wg/opsawg/>
WG List: <mailto:opsawg@ietf.org>
Editor: Marisol Palmero
<mailto:mpalmero@cisco.com>
Editor: Josh Suhr
<mailto:josuhr@cisco.com>
Editor: Sudhendu Kumar
<mailto:skumar23@ncsu.edu>";
description
"This YANG module includes the entitlement attributes of a
product.
Copyright (c) 2021 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject to
the license terms contained in, the Simplified BSD License set
forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(https://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX
(https://www.rfc-editor.org/info/rfcXXXX); see the RFC itself
for full legal notices.
The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL', 'SHALL
NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'NOT RECOMMENDED',
'MAY', and 'OPTIONAL' in this document are to be interpreted as
described in BCP 14 (RFC 2119) (RFC 8174) when, and only when,
they appear in all capitals, as shown here.
";
revision 2023-10-23 {
description
"Renamed all references from LMO to ALMO. Refer to
DMLMO draft";
reference
"RFC XXXX: ALMO YANG Model";
}
// Can we capture entitlement ties to API access where we may be
// entitled on events queries per second, minute, hour, etc.
// This is a popular model in the cloud space for example the Google
// MAPs API??
identity entitlement {
base ietf-almo-common:almo-class;
description "A entitlement is a class of ALMO that represents how
the asset(s) or feature(s) can be leveraged and what is required
in cases the asset(s) or feature(s) are changed.";
}
augment /ietf-almo:almos/ietf-almo:almo/ietf-almo:inst {
when "derived-from-or-self(../ietf-almo:almo-class, "+
" 'ietf-almo-entitlements:entitlement')";
description
"entitlements container includes attributes for entitlements";
leaf uid {
type string;
description
"Unique Entitlement Identifier";
}
leaf state {
type ietf-almo-common:entitlement-state-t;
description
"Entitlement state; e.g., active, inactive, or unknown";
}
container renewal-profile {
description
"Profile of entitlement renewal status and information";
leaf activation-date {
type yang:date-and-time;
description
"Activation Date";
}
leaf expiration-date {
type yang:date-and-time;
description
"Expiration Date";
}
}
container parent-entitlement {
// There is already a parent in the base model but we have to force this to
// be entilement.. can we do something else?
description
"identifies the hierarchy structure for a given instance";
leaf almo-class {
type leafref {
path /ietf-almo:almos/ietf-almo:almo/ietf-almo:almo-class;
}
must "derived-from-or-self(current(), "+
" 'ietf-almo-entitlements:entitlement')";
description
"almo-class that defines the parent type of instance";
}
leaf id {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo[ietf-almo:almo-class"
+ "=current()/../almo-class]/ietf-almo:inst/ietf-almo:id";
}
description
"identifies the parent type of instance";
}
}
container entitlement-attachements {
description
"An entilement entitles an entity to the use of a feature under an
asset.";
container entity {
description "The entity to which the entilemets entitles.
There can be multiple. Empty entity attachments can occur for
special licenses. This value still SHOULD always be explicitly filed.
It might be expanded to cover selection cases e.g. all users in
a special country.";
container organizations {
description "Attachment to specifc organizations.";
list organization {
key "almo-class id";
description
"list of organizations";
leaf almo-class {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo/ietf-almo:almo-class";
}
must "derived-from-or-self(current(), "+
" 'ietf-almo-organization:organization')";
description
"organization to which this entitlement is attached";
}
leaf id {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo[ietf-almo:almo-class = "+
" current()/../almo-class]/ietf-almo:inst/ietf-almo:id";
}
description
"organization to which this entitlement is attached";
}
}
}
}
// We could expand this to more generic selections of users
// or organizations, but not to save lines, but when the attachment
// is loose per the license: "e.g. users in Asia"
container assets {
description "Descriptive set of assets to which the license is attached. Some licenses might not be attached to specific assets";
container assets {
description
"list of assets to which this license is attached";
list asset {
key "almo-class id";
description
"list of assets to which this license is attached";
leaf almo-class {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo/ietf-almo:almo-class";
}
must "derived-from-or-self(current(), "+
" 'ietf-almo-asset:asset')";
description
"organization to which this entitlement is attached";
}
leaf id {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo[ietf-almo:almo-class = "+
" current()/../almo-class]/ietf-almo:inst/ietf-almo:id";
}
description
"organization to which this entitlement is attached";
}
}
}
// We could have other container with more descriptive set of assets
// such as "all laptops in school Y (site license)"
}
}
}
augment /ietf-almo:almos/ietf-almo:almo/ietf-almo:inst/ietf-almo-feature:features/ietf-almo-feature:feature {
when "derived-from-or-self(../../../ietf-almo:almo-class, "+
" 'ietf-almo-asset:asset')";
description "Augmenting features with entilement info.";
container entitlements-info {
config false;
description
"information over this feature under this asset";
list entities-entitlement-info {
description "include info for the entitlement";
container entity-entitlement-info {
description "Entities that uses the feature. It can be empty
but each server should provide meaning to this. It could mean
general use of the feature";
container organizations {
description "link to organizations.";
list organization {
key "almo-class id";
description
"list of organizations";
leaf almo-class {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo/ietf-almo:almo-class";
}
must "derived-from-or-self(current(), "+
" 'ietf-almo-organization:organization')";
description
"organization to which this entitlement is attached";
}
leaf id {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo[ietf-almo:almo-class = "+
" current()/../almo-class]/ietf-almo:inst/ietf-almo:id";
}
description
"organization to which this feature and entitlement is related";
}
}
}
}
container entitlements {
description "List of entitlements that enable the use of this
feature.";
list entitlement {
key "almo-class id";
description
"Subfeature ID";
leaf almo-class {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo/ietf-almo:almo-class";
}
must "derived-from-or-self(current(), "+
" 'ietf-almo-entitlements:entitlement')";
description
"Reference to almo-class";
}
leaf id {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo[ietf-almo:almo-class = "+
" current()/../almo-class]/ietf-almo:inst/ietf-almo:id";
}
description
"Reference to Feature ID";
}
}
}
leaf entitled {
type boolean;
description "Means one or more entitles allows the use of this feature.
This does not deal with limits, just the general use of the feature
The lack of this leaf means the server state is not determined";
}
leaf infriges {
type boolean;
description "Whether the feature use is infriging its entilement level.
It means the feature is in use iwthout an entitlement, or going over a level.";
}
leaf in-use {
type boolean;
description "Whther the level of usage of the feature will leave it
to infrigement if the entilement in entitlements is removed";
}
container entitlement-limit {
// TODO: this was failing even without the entitled.
//must "../entitled = 'true'" {
// error-message "entiltlement-limit can only exist if entitled is set to true";
//}
description "Limits of the entilement";
// Check with Jan if it is better to use the usage class, but thsi one is specific
// for licenses.
// This container should be expanded if needed by augmentation
// This could also be a grouping with the usage, but then the meanings
// could change..
// And one cannot really augment groupins, so yeah..
// Pending: Will the meaning of this containers mean anything?
// Maybe the container without the value as None?
container users {
description "Number of users";
leaf value {
type uint32;
units "users";
description "Limit in number of users";
}
leaf maximum {
type uint32;
units "users";
description
"Maximum number of users allowed by the current entilement.
Lack of this container means there is no user limit";
}
}
container cpus {
description "Number of cpus";
leaf value {
type uint32;
units "cpus";
description "Limit in number of cpus. Some vendors have their own
meaning of cpus in the commercial sense. This could mean that too.";
}
leaf maximum {
type uint32;
units "cpus";
description
"Maximum number of cpus allowed by the current entilement.
Lack of this container means there is no cpu limit on the entitlement level";
}
}
container bandwidth {
description "Limit in bandwidth";
leaf value {
type decimal64 {
fraction-digits 6;
}
units "Mbps";
description "Limit in the bandwidth of a service.";
}
leaf maximum {
type decimal64 {
fraction-digits 6;
}
units "Mbps";
description
"Maximum amount of bandwidth of the server by license restriction.";
}
}
// do an expansion of egress and ingress queues as an example
}
}
}
}
<CODE ENDS>¶
<CODE BEGINS> file "ietf-almo-feature@2023-10-23.yang"
module ietf-almo-feature {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-almo-feature";
prefix ietf-almo-feature;
import ietf-almo-common {
prefix ietf-almo-common;
}
import ietf-almo {
prefix ietf-almo;
}
import ietf-almo-assets {
prefix ietf-almo-asset;
}
organization
"IETF OPSA (Operations and Management Area) Working Group";
contact
"WG Web: <https://datatracker.ietf.org/wg/opsawg/>
WG List: <mailto:opsawg@ietf.org>
Editor: Marisol Palmero
<mailto:mpalmero@cisco.com>
Editor: Josh Suhr
<mailto:josuhr@cisco.com>
Editor: Sudhendu Kumar
<mailto:skumar23@ncsu.edu>";
description
"This YANG module includes the different attributes that define
description, usage and resource consumption for specific
features or capabilities of assets.
Copyright (c) 2021 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject to
the license terms contained in, the Simplified BSD License set
forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(https://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX
(https://www.rfc-editor.org/info/rfcXXXX); see the RFC itself
for full legal notices.";
revision 2023-10-23 {
description
"Renamed all references from LMO to ALMO. Refer to
DMLMO draft";
reference
"RFC XXXX: ALMO YANG Model";
}
identity feature {
base ietf-almo-common:almo-class;
description
"A feature is a class of almo that represents
options or functional capabilities available in an asset";
}
augment /ietf-almo:almos/ietf-almo:almo/ietf-almo:inst {
when "derived-from-or-self(../ietf-almo:almo-class, 'ietf-almo-asset:asset')";
description
"feature attributes related to assets";
container features {
description
"Features supported by an asset";
list feature {
key "almo-class id";
description
"Subfeature ID";
leaf almo-class {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo/ietf-almo:almo-class";
}
must "derived-from-or-self(current(), "+
" 'ietf-almo-feature:feature')";
description
"Reference to almo-class";
}
leaf id {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo[ietf-almo:almo-class = "+
" current()/../almo-class]/ietf-almo:inst/ietf-almo:id";
}
description
"Reference to Feature ID";
}
}
}
//Fill more leafs for license when organization
//module is present here...
}
augment /ietf-almo:almos/ietf-almo:almo/ietf-almo:inst {
when "derived-from-or-self(../ietf-almo:almo-class, "+
" 'ietf-almo-feature:feature')";
description
"feature attributes";
leaf name {
type string;
description
"Friendly name of the feature";
}
leaf summary {
type string;
description
"Brief description of the feature";
}
leaf category {
type string;
description
"Feature category or tag list (as applicable to the
product)";
}
leaf entitlement {
type string;
description
"Minimum entitlement level, subscription, or license level
required for the feature";
}
leaf first-available-version {
type string;
description
"The first version in which this feature was enabled";
}
container backported-versions {
config false;
description
"software patch or update is taken from a recent software
version and applied to an older version of the same
software";
list backported-version {
config false;
description
"Backport releases to older release";
leaf version {
type identityref {
base ietf-almo-common:version;
}
description
"version of the backport release";
}
}
}
leaf scope {
type identityref {
base ietf-almo-common:feature-scope;
}
description
"Optional tag that could apply to any of the usage
features, so that if there are multiple dimensions of
reporting that need to be accommodated (i.e., report
feature usage by 'site')";
}
list config-options {
key "id";
description
"Feature configuration profile - optional, for features
that require configuration beyond enable/disable";
leaf id {
type string;
description
"Identify feature configuration option uniquely across
all products";
}
leaf name {
type string;
description
"Friendly name of the feature option";
}
leaf summary {
type string;
description
"Brief description of the feature option";
}
list characteristic {
key "id";
description
"Characteristics of feature configuration options,
i.e. value=enabled/disabled";
leaf id {
type string;
description
"Identifier for feature option configuration
characteristic";
}
leaf name {
type string;
description
"Friendly name for feature option configuration
characteristic";
}
leaf value {
type string;
description
"Configuration characteristic value; describes how
this feature option characteristic is configured";
}
}
}
container asset{
description
"Asset that this feature is attached to";
leaf almo-class {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo/ietf-almo:almo-class";
}
must "derived-from-or-self(current(), "+
" 'ietf-almo-asset:asset')";
default ietf-almo-asset:asset;
description
"Asset class to which this feature is attached";
}
leaf id {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo[ietf-almo:almo-class = "+
"current()/../almo-class]/ietf-almo:inst/ietf-almo:id";
}
description
"Asset to which this feature is attached";
}
}
container subfeatures {
description
"Sub-features to the top-level feature";
list subfeature {
key "almo-class id";
description
"Subfeature ID";
leaf almo-class {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo/ietf-almo:almo-class";
}
must "derived-from-or-self(current(), "+
" 'ietf-almo-feature:feature')";
description
"almo-class reference";
}
leaf id {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo[ietf-almo:almo-class = "+
" current()/../almo-class]/ietf-almo:inst/ietf-almo:id";
}
description
"Reference to Feature ID";
}
}
}
}
<CODE ENDS>¶
<CODE BEGINS> file "ietf-almo-usage@2023-10-23.yang"
module ietf-almo-usage {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-almo-usage";
prefix ietf-almo-usage;
import ietf-almo-common {
prefix ietf-almo-common;
}
import ietf-almo {
prefix ietf-almo;
}
import ietf-yang-types {
prefix yang;
}
import ietf-almo-feature {
prefix ietf-almo-feature;
}
organization
"IETF OPSA (Operations and Management Area) Working Group";
contact
"WG Web: <https://datatracker.ietf.org/wg/opsawg/>
WG List: <mailto:opsawg@ietf.org>
Editor: Jan Lindblad
<mailto:jlindbla@cisco.com>
Editor: Marisol Palmero
<mailto:mpalmero@cisco.com>";
description
"This YANG module includes the different attributes that define
description, usage and resource consumption for specific
features or capabilities of assets.
Copyright (c) 2021 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject to
the license terms contained in, the Simplified BSD License set
forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(https://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX
(https://www.rfc-editor.org/info/rfcXXXX); see the RFC itself
for full legal notices.";
revision 2023-10-23 {
description
"Renamed all references from LMO to ALMO. Refer to
initial DMLMO draft";
reference
"RFC XXXX: ALMO YANG Model";
}
identity usage {
base ietf-almo-common:almo-class;
description "A usage is a class of almo that represents how
features of an asset are used";
}
augment /ietf-almo:almos/ietf-almo:almo/ietf-almo:inst {
when "derived-from-or-self(../ietf-almo:almo-class, "+
" 'ietf-almo-usage:usage')";
description
"usage attributes";
container feature {
leaf almo-class {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo/ietf-almo:almo-class";
}
must "derived-from-or-self(current(), "+
" 'ietf-almo-feature:feature')";
default ietf-almo-feature:feature;
description
"feature to which this license is attached";
}
leaf id {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo[ietf-almo:almo-class = "+
" current()/../almo-class]/ietf-almo:inst/ietf-almo:id";
}
description
"Feature to which this license is attached";
}
description
"usage link to a feature";
}
leaf name {
type string;
description
"Name of feature usage characteristic";
}
leaf summary {
type string;
description
"Brief description of feature usage characteristic";
}
leaf uri {
type string;
description
"Target URI of feature characteristic, if applicable - e.g.,
for clickstream or API";
}
leaf deployment-mode {
type identityref {
base ietf-almo-common:deployment-mode;
}
description
"Deployment mode for the feature. When applicable, feature
might be independent of the deployment mode in the asset;
e.g., cloud, HA cluster, virtual appliance, etc.";
}
leaf scope {
type identityref {
base ietf-almo-common:feature-scope;
}
description
"Optional tag that could apply to any of the usage
features, so that if there are multiple dimensions of
reporting that need to be accommodated, (i.e., report
feature usage by 'site')";
}
leaf activation-status {
type string;
description
"Feature activation status for this instance of the
product (on/off; active/inactive; enabled/disabled)";
}
leaf instances {
type uint32;
description
"Number of instances or end-points using this feature";
}
leaf timestamp {
type yang:date-and-time;
description
"Some counters will benefit from timestamp based on the
time when the counter has been collected";
}
leaf count {
type uint32;
units "times";
description
"Count of times the feature has been used";
}
list frequency {
key "name";
description
"Frequency with which the feature is used";
leaf name {
type string {
length "1..64";
}
description
"reference in case that feature is for different
purpose of usage";
}
leaf type-freq {
type string;
description
"Frequency type, i.e daily, weekly, monthly";
}
leaf value {
type yang:counter64;
description
"Value collected for the usage";
}
}
list resource-consumption {
key "id";
description
"Resource consumption profile";
leaf id {
type string;
description
"Identify resource for consumption measurement";
}
leaf name {
type string;
description
"Friendly name of the resource";
}
leaf summary {
type string;
description
"Brief description of the resource";
}
list characteristic {
key "id";
description
"Characteristic of resource consumption";
leaf id {
type string;
description
"Identifier for resource consumption characteristic";
}
leaf name {
type string;
description
"Friendly name for resource consumption
characteristic";
}
leaf unit {
type string;
description
"unit of measurement for the characteristic";
}
// NEED to define identity type for unit: min, hour, sec,
// days, ...
leaf value {
type yang:counter64;
description
"Resource consumption characteristic measurement";
}
leaf value-max {
type yang:counter64;
description
"Maximum resource consumption characteristic value";
}
}
}
}
<CODE ENDS>¶
<CODE BEGINS> file "ietf-almo-event-report@2023-10-23.yang"
module ietf-almo-event-report {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-almo-event-report";
prefix ietf-almo-event;
import ietf-almo-common {
prefix ietf-almo-common;
}
import ietf-almo {
prefix ietf-almo;
}
import ietf-yang-types {
prefix yang;
}
import ietf-almo-assets {
prefix ietf-almo-asset;
}
import ietf-almo-feature {
prefix ietf-almo-feature;
}
organization
"IETF OPSA (Operations and Management Area) Working Group";
contact
"WG Web: <https://datatracker.ietf.org/wg/opsawg/>
WG List: <mailto:opsawg@ietf.org>
Editor: Marisol Palmero
<mailto:mpalmero@cisco.com>
Editor: Josh Suhr
<mailto:josuhr@cisco.com>
Editor: Sudhendu Kumar
<mailto:skumar23@ncsu.edu>";
description
"This YANG module includes the incident management attributes
to handle event reports.
Copyright (c) 2021 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject to
the license terms contained in, the Simplified BSD License set
forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(https://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX
(https://www.rfc-editor.org/info/rfcXXXX); see the RFC itself
for full legal notices.";
revision 2023-10-23 {
description
"Renamed all references from LMO to ALMO. Refer to
DMLMO draft";
reference
"RFC XXXX: ALMO YANG Model";
}
identity event {
base ietf-almo-common:almo-class;
description
"An event is a class of ALMO that represents an event
that is not part of normal operations that disrupts
operational processes.";
}
augment /ietf-almo:almos/ietf-almo:almo/ietf-almo:inst {
when "derived-from-or-self(../ietf-almo:almo-class, "+
" 'ietf-almo-event:event')";
description
"event container includes attributes for event reports";
leaf id {
type string;
description
"Technical Support Center Case Number id";
}
leaf title {
type string;
description
"headline Incident Case";
}
leaf summary {
type string;
description
"Problem description summary";
}
leaf severity {
type string;
description
"severity, in some cases also defined as priority";
// NEED to define different levels of severity, from
// severity 1 to 6, i.e. Sev1: network down, Sev6: enhacement
}
leaf status {
type string;
description
"case status, i.e. Customer-Pending, Customer
Engineer-Pending, Developer-Pending, Closed, Open, etc.";
// NEED to define different status
}
leaf created {
type yang:date-and-time;
description
"created date-and-time";
}
leaf last_updated {
type yang:date-and-time;
description
"last updated date-and-time";
}
leaf capability {
type string;
description
"i.e. to reveal associated RMA items";
}
leaf technology{
type string;
description
"Technology related";
}
leaf subtechnology{
type string;
description
"Subtechnology related";
}
leaf problem-type{
type string;
description
"Problem type definition, i.e. network, faulty hardware,
performance, security, etc. ";
}
leaf resolution{
type string;
description
"code (closed cases only)";
}
leaf owner{
type string;
description
"Customer in charge of the case";
// NEED to refer to user almo-class
}
leaf support-engineer{
type string;
description
"Customer Support Engineer in charge of the case";
// NEED to refer to user almo-class
}
container asset {
description
"Asset container to which this event is attached";
leaf almo-class {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo/ietf-almo:almo-class";
}
must "derived-from-or-self(current(), "+
" 'ietf-almo-asset:asset')";
default ietf-almo-asset:asset;
description
"Asset class to which this event is attached";
}
leaf id {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo[ietf-almo:almo-class = "+
" current()/../almo-class]/ietf-almo:inst/ietf-almo:id";
}
description
"Asset to which this event is attached";
}
}
container feature {
description
"Feature to which this event is attached";
leaf almo-class {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo/ietf-almo:almo-class";
}
must "derived-from-or-self(current(), "+
" 'ietf-almo-feature:feature')";
default ietf-almo-feature:feature;
description
"Feature class to which this event is attached";
}
leaf id {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo[ietf-almo:almo-class = "+
" current()/../almo-class]/ietf-almo:inst/ietf-almo:id";
}
description
"Feature to which this event is attached";
}
}
leaf contract-number {
type string;
description
"Support contract number";
// NEED to evaluate if it should be independent container. It
// should be associated to asset and license
}
}
<CODE ENDS>¶
<CODE BEGINS> file "ietf-almo-user@2023-10-23.yang"
module ietf-almo-user {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-almo-user";
prefix ietf-almo-user;
import ietf-almo-common {
prefix ietf-almo-common;
}
import ietf-almo {
prefix ietf-almo;
}
import ietf-almo-entitlements {
prefix ietf-almo-entitlements;
}
import ietf-almo-organization {
prefix ietf-almo-organization;
}
import ietf-almo-feature {
prefix ietf-almo-feature;
}
organization
"IETF OPSA (Operations and Management Area) Working Group";
contact
"WG Web: <https://datatracker.ietf.org/wg/opsawg/>
WG List: <mailto:opsawg@ietf.org>
Editor: Jan Lindblad
<mailto:jlindbla@cisco.com>
Editor: Marisol Palmero
<mailto:mpalmero@cisco.com>";
description
"This YANG module includes the user module and the different
attributes that defines it.
Copyright (c) 2021 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject to
the license terms contained in, the Simplified BSD License set
forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(https://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX
(https://www.rfc-editor.org/info/rfcXXXX); see the RFC itself
for full legal notices.";
revision 2023-10-23 {
description
"Renamed all references from LMO to ALMO. Refer to
DMLMO draft";
reference
"RFC XXXX: ALMO YANG Model";
}
identity user {
base ietf-almo-common:almo-class;
description
"A user is a class of almo that refers to owner or consumer
of the asset. User belongs to an organization. Within the
organization there are entities that: a) use the assets
in their operations, b) manage the assets. ";
}
augment /ietf-almo:almos/ietf-almo:almo/ietf-almo:inst {
when "derived-from-or-self(../ietf-almo:almo-class, "+
" 'ietf-almo-user:user')";
description
"user attributes";
leaf billing-account {
type uint32;
description "billing account information";
}
container represents {
description
"Organization to which this user is attached";
leaf almo-class {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo/ietf-almo:almo-class";
}
must "derived-from-or-self(current(), "+
" 'ietf-almo-organization:organization')";
description
"Organization class to which this user is attached";
}
leaf id {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo[ietf-almo:almo-class = "+
" current()/../almo-class]/ietf-almo:inst/ietf-almo:id";
}
description
"Organization to which this user is attached";
}
}
leaf authority {
type enumeration {
enum super-user {
description
"super-user";
}
enum standard-user {
description
"standard-user";
}
enum restricted-user {
description
"restricted-user";
}
enum admin {
description
"admin";
}
}
default standard-user;
description
"authority assign to the user";
}
leaf email {
type string;
description
"user email";
}
// Fill in more leafs you want on organizations here...
}
augment /ietf-almo:almos/ietf-almo:almo/ietf-almo:inst/ietf-almo-entitlements:entitlement-attachements/ietf-almo-entitlements:entity {
when "derived-from-or-self(../../../ietf-almo:almo-class, "+
" 'ietf-almo-entitlements:entitlement')";
description
"entitlement attributes related to user";
container users {
description "Users to which the entilement is attached";
list users {
key "almo-class id";
description
"list of users";
leaf almo-class {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo/ietf-almo:almo-class";
}
must "derived-from-or-self(current(), "+
" 'users')";
description
"users to which this entitlement is attached";
}
leaf id {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo[ietf-almo:almo-class = "+
" current()/../almo-class]/ietf-almo:inst/ietf-almo:id";
}
description
"users to which this entitlement is attached";
}
}
}
}
augment /ietf-almo:almos/ietf-almo:almo/ietf-almo:inst/ietf-almo-feature:features/ietf-almo-feature:feature/ietf-almo-entitlements:entitlements-info/ietf-almo-entitlements:entities-entitlement-info/ietf-almo-entitlements:entity-entitlement-info {
when "derived-from-or-self(../../../../../../ietf-almo:almo-class, "+
" 'ietf-almo-entitlements:entitlement')";
description
"entitlement attributes related to user";
container users {
description "Users to which the entilement is attached";
list users {
key "almo-class id";
description
"list of users";
leaf almo-class {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo/ietf-almo:almo-class";
}
must "derived-from-or-self(current(), "+
" 'users')";
description
"users to which this entitlement is attached";
}
leaf id {
type leafref {
path "/ietf-almo:almos/ietf-almo:almo[ietf-almo:almo-class = "+
" current()/../almo-class]/ietf-almo:inst/ietf-almo:id";
}
description
"users to which this entitlement is attached";
}
}
}
}
<CODE ENDS>¶
ALMO Data Models defines the data schemas for ALMO data. ALMO Data Models are based on YANG. YANG data models can be used independent of the transport and can be converted into any encoding format supported by the network configuration protocol. YANG is a protocol independent.¶
To enable the exchange of ALMO data among all interested parties, deployment considerations that are out of the scope of this document, will need to include:¶
The data structure to describe all metrics and quantify relevant data consistently, i.e. specific formats like XML or JSON encoded message would be deemed valid or invalid based on ALMO models.¶
The process to share and collect ALMO data across the consumers consistently, including the transport mechanism. The ALMO YANG models can be used with network management protocols such as NETCONF [RFC6241], RESTCONF [RFC8040], streaming telemetry, etc. OpenAPI specification might also help to consume ALMO metrics.¶
How the configuration of assets should be done.¶
The security considerations mentioned in section 17 of [RFC7950] apply.¶
LMO brings several security and privacy implications because of the various components and attributes of the information model. For example, each functional component can be tampered with to give manipulated data. ALMO when used alone or with other relevant data, can identify an individual, revealing Personal Identifiable Information (PII). Misconfigurations can lead to data being accessed by unauthorized entities.¶
Methods exist to secure the communication of management information. The transport entity of the functional model MUST implement methods for secure transport. This document also contains an Information model and Data-Model in which none of the objects defined are writable. If the objects are deemed sensitive in a particular environment, access to them MUST be restricted using appropriately configured security and access control rights. The information model contains several optional elements which can be enabled or disabled for the sake of privacy and security. Proper authentication and audit trail MUST be included for all the users/processes that access ALMO data.¶
This document registers URIs in the IETF XML registry [RFC3688]. Following the format in [RFC3688], the registrations defined below are requested:¶
URI: urn:ietf:params:xml:ns:yang:ietf-almo
Registrant Contact: The OPSA WG of the IETF.
XML: N/A, the requested URI is an XML namespace.
¶
URI: urn:ietf:params:xml:ns:yang:ietf-almo-common
Registrant Contact: The OPSA WG of the IETF.
XML: N/A, the requested URI is an XML namespace.
¶
URI: urn:ietf:params:xml:ns:yang:ietf-almo-assets
Registrant Contact: The OPSA WG of the IETF.
XML: N/A, the requested URI is an XML namespace.
¶
URI: urn:ietf:params:xml:ns:yang:ietf-almo-entitlements
Registrant Contact: The OPSA WG of the IETF.
XML: N/A, the requested URI is an XML namespace.
¶
URI: urn:ietf:params:xml:ns:yang:ietf-almo-feature
Registrant Contact: The OPSA WG of the IETF.
XML: N/A, the requested URI is an XML namespace.
¶
URI: urn:ietf:params:xml:ns:yang:ietf-almo-usage
Registrant Contact: The OPSA WG of the IETF.
XML: N/A, the requested URI is an XML namespace.
¶
URI: urn:ietf:params:xml:ns:yang:ietf-almo-event-report
Registrant Contact: The OPSA WG of the IETF.
XML: N/A, the requested URI is an XML namespace.
¶
URI: urn:ietf:params:xml:ns:yang:ietf-almo-organization
Registrant Contact: The OPSA WG of the IETF.
XML: N/A, the requested URI is an XML namespace.
¶
URI: urn:ietf:params:xml:ns:yang:ietf-almo-user
Registrant Contact: The OPSA WG of the IETF.
XML: N/A, the requested URI is an XML namespace.
¶
This document registers YANG modules in the YANG Module Names registry [RFC7950]. Following the format in [RFC7950], the registrations defined below are requested:¶
name: ietf-almo
namespace: urn:ietf:params:xml:ns:yang:ietf-almo
maintained by IANA: N
prefix: ietf-almo
reference: RFC XXXX
¶
name: ietf-almo-common
namespace: urn:ietf:params:xml:ns:yang:ietf-almo-common
maintained by IANA: N
prefix: ietf-almo-common
reference: RFC XXXX
¶
name: ietf-almo-assets
namespace: urn:ietf:params:xml:ns:yang:ietf-almo-assets
maintained by IANA: N
prefix: ietf-almo-asset
reference: RFC XXXX
¶
name: ietf-almo-entitlements
namespace: urn:ietf:params:xml:ns:yang:ietf-almo-entitlements
maintained by IANA: N
prefix: ietf-almo-entitlements
reference: RFC XXXX
¶
name: ietf-almo-feature
namespace: urn:ietf:params:xml:ns:yang:ietf-almo-feature
maintained by IANA: N
prefix: ietf-almo-feature
reference: RFC XXXX
¶
name: ietf-almo-usage
namespace: urn:ietf:params:xml:ns:yang:ietf-almo-usage
maintained by IANA: N
prefix: ietf-almo-usage
reference: RFC XXXX
¶
name: ietf-almo-event-report
namespace: urn:ietf:params:xml:ns:yang:ietf-almo-event-report
maintained by IANA: N
prefix: ietf-almo-event
reference: RFC XXXX
¶
name: ietf-almo-organization
namespace: urn:ietf:params:xml:ns:yang:ietf-almo-organization
maintained by IANA: N
prefix: ietf-almo-organization
reference: RFC XXXX
¶
name: ietf-almo-user
namespace: urn:ietf:params:xml:ns:yang:ietf-almo-user
maintained by IANA: N
prefix: ietf-almo-user
reference: RFC XXXX
¶
RFC Editor Note: This section is to be removed during the final publication of the document.¶
version 01¶
DMALMO data models will be adjusted once the terminology of the core IVY WG data models is agreed.¶
version 00¶
Initial version of DMALMO, based on ALMO version 01 and DMLMO version 10.¶
This document was created by meaningful contributions from Josh Suhr, Eric Vyncke, Yannis Viniotis, Nagendra Kumar Nainar, Yenu Gobena, Dhiren Tailor, Jan Lindblad and Shwetha Bhandari.¶
The authors wish to thank Gonzalo Salgueiro, Martin Beverley, Mohamed Boucadair, Ignacio Dominguez Martinez, and many others for their helpful comments and suggestions.¶
Hardware network inventory is described as part of network topology which is defined in [RFC8345], it has been explored in several IETF work as it might need an extension for some of the use cases that need to consume inventory information. This is the case for ALMO and DMALMO, as assets are defined as hardware, software or even service instances.¶
This section summarizes and provides an example with the changes to make DMALMO compatible to any future changes that will come as part of the current inventory discussions and decisions.¶
DMLMO version -09 provided the approach to make DMALMO independent from the network inventory discussions, providing a way to consume any inventory management module(s). Version -09 contains changes to accommodate ietf-almo-assets, to any other inventory module that might be required.¶
The following example considers iana-hardware and ietf-network-inventory YANG modules as inventory YANG modules to consider. It could include others, i.e., openconfig-platform.¶
<CODE BEGINS> file "iana-hardware@.yang"
module iana-hardware {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:iana-hardware";
prefix ianahw;
organization "IANA";
contact
" Internet Assigned Numbers Authority
Postal: ICANN
12025 Waterfront Drive, Suite 300
Los Angeles, CA 90094-2536
United States of America
Tel: +1 310 301 5800
E-Mail: iana@iana.org>";
description
"IANA-defined identities for hardware class.
The latest revision of this YANG module can be obtained from
the IANA website.
Requests for new values should be made to IANA via
email (iana@iana.org).
Copyright (c) 2018 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(https://trustee.ietf.org/license-info).
The initial version of this YANG module is part of RFC 8348;
see the RFC itself for full legal notices.";
reference
"https://www.iana.org/assignments/yang-parameters";
revision 2018-03-13 {
description
"Initial revision.";
reference
"RFC 8348: A YANG Data Model for Hardware Management";
}
/*
* Identities
*/
identity hardware-class {
description
"This identity is the base for all hardware class
identifiers.";
}
identity unknown {
base ianahw:hardware-class;
description
"This identity is applicable if the hardware class is unknown
to the server.";
}
identity chassis {
base ianahw:hardware-class;
description
"This identity is applicable if the hardware class is an
overall container for networking equipment. Any class of
physical component, except a stack, may be contained within a
chassis; a chassis may only be contained within a stack.";
}
identity backplane {
base ianahw:hardware-class;
description
"This identity is applicable if the hardware class is some sort
of device for aggregating and forwarding networking traffic,
such as a shared backplane in a modular ethernet switch. Note
that an implementation may model a backplane as a single
physical component, which is actually implemented as multiple
discrete physical components (within a chassis or stack).";
}
identity container {
base ianahw:hardware-class;
description
"This identity is applicable if the hardware class is capable
of containing one or more removable physical entities,
possibly of different types. For example, each (empty or
full) slot in a chassis will be modeled as a container. Note
that all removable physical components should be modeled
within a container component, such as field-replaceable
modules, fans, or power supplies. Note that all known
containers should be modeled by the agent, including empty
containers.";
}
identity power-supply {
base ianahw:hardware-class;
description
"This identity is applicable if the hardware class is a
power-supplying component.";
}
identity fan {
base ianahw:hardware-class;
description
"This identity is applicable if the hardware class is a fan or
other heat-reduction component.";
}
identity sensor {
base ianahw:hardware-class;
description
"This identity is applicable if the hardware class is some sort
of sensor, such as a temperature sensor within a router
chassis.";
}
identity module {
base ianahw:hardware-class;
description
"This identity is applicable if the hardware class is some sort
of self-contained sub-system. If a module component is
removable, then it should be modeled within a container
component; otherwise, it should be modeled directly within
another physical component (e.g., a chassis or another
module).";
}
identity port {
base ianahw:hardware-class;
description
"This identity is applicable if the hardware class is some sort
of networking port capable of receiving and/or transmitting
networking traffic.";
}
identity stack {
base ianahw:hardware-class;
description
"This identity is applicable if the hardware class is some sort
of super-container (possibly virtual) intended to group
together multiple chassis entities. A stack may be realized
by a virtual cable, a real interconnect cable attached to
multiple chassis, or multiple interconnect cables. A stack
should not be modeled within any other physical components,
but a stack may be contained within another stack. Only
chassis components should be contained within a stack.";
}
identity cpu {
base ianahw:hardware-class;
description
"This identity is applicable if the hardware class is some sort
of central processing unit.";
}
identity energy-object {
base ianahw:hardware-class;
description
"This identity is applicable if the hardware class is some sort
of energy object, i.e., it is a piece of equipment that is
part of or attached to a communications network that is
monitored, it is controlled, or it aids in the management of
another device for Energy Management.";
}
identity battery {
base ianahw:hardware-class;
description
"This identity is applicable if the hardware class is some sort
of battery.";
}
identity storage-drive {
base ianahw:hardware-class;
description
"This identity is applicable if the hardware class is some sort
of component with data storage capability as its main
functionality, e.g., hard disk drive (HDD), solid-state device
(SSD), solid-state hybrid drive (SSHD), object storage device
(OSD), or other.";
}
<CODE ENDS>¶
The YANG modules ietf-almo-example-mapping-ietf-network-inventory and ietf-almo-example-mapping-openconfig-platform make the import of the inventory module(s) and augment the ietf-almo-assets YANG module to include inventory attributes to the asset identity.¶
For this practice, ietf-almo-assets.yang, removes vendor, name, description, pid, serial-number, vid, mac-address, ip-address, entity-name, product-description, udi, transparency-info as these and similar properties are expected to be managed using other inventory mechanism.¶
This process requires to include a mapping YANG module per imported inventory YANG module.¶
Module ietf-almo-example-mapping-ietf-network-inventory, makes the mapping between ietf-network-inventory and ietf-almo-assets, augmenting asset identity:¶
<CODE BEGINS> file "ietf-almo-example-mapping-ietf-network-inventory@2023-10-23.yang"
module ietf-almo-example-mapping-ietf-network-inventory {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-almo-example-mapping-ietf-network-inventory";
prefix ietf-almo-example-map-ietf;
import ietf-almo {
prefix ietf-almo;
}
import ietf-almo-assets {
prefix ietf-almo-asset;
}
import ietf-network-inventory {
prefix ni;
}
organization
"IETF OPSA (Operations and Management Area) Working Group";
contact
"WG Web: <https://datatracker.ietf.org/wg/opsawg/>
WG List: <mailto:opsawg@ietf.org>
Editor: Jan Lindblad
<mailto:jlindbla@cisco.com>
Editor: Marisol Palmero
<mailto:mpalmero@cisco.com>";
description
"This YANG module maps the IETF LMO asset concept to the
IETF network inventory framework.
Copyright (c) 2021 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject to
the license terms contained in, the Simplified BSD License set
forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(https://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX
(https://www.rfc-editor.org/info/rfcXXXX); see the RFC itself
for full legal notices.";
revision 2023-10-23 {
description
"Renamed all references from LMO to ALMO. Refer to
DMLMO draft";
reference
"RFC XXXX: ALMO YANG Model";
}
augment /ietf-almo:almos/ietf-almo:almo/ietf-almo:inst {
when "derived-from-or-self(../ietf-almo:almo-class,'ietf-almo-asset:asset')";
choice mapping-type {
// config true;
description
"mapping type description";
case network-element {
leaf network-element-ref {
type leafref {
path "/ni:network-inventory/ni:network-elements/"
+ "ni:network-element/ni:uuid";
}
description
"network element reference description";
}
}
case component {
leaf component-network-element-ref {
type leafref {
path "/ni:network-inventory/ni:network-elements/"
+ "ni:network-element/ni:uuid";
}
description
"component network element reference description";
}
leaf component-ref {
type leafref {
path "/ni:network-inventory/ni:network-elements/"
+ "ni:network-element"
+ "[ni:uuid = current()/../network-element-ref]/"
+ "ni:components/ni:component/ni:uuid";
}
description
"component reference description";
}
}
case rack {
leaf rack-equipment-room-ref {
type leafref {
path "/ni:network-inventory/ni:equipment-rooms/"
+ "ni:equipment-room/ni:uuid";
}
description
"rack equipment room reference description";
}
leaf rack-ref {
type leafref {
path "/ni:network-inventory/ni:equipment-rooms/"
+ "ni:equipment-room"
+ "[ni:uuid = current()/../rack-equipment-room-ref]/"
+ "ni:racks/ni:rack/ni:uuid";
}
description
"rack reference description";
}
}
}
description
"This adds a reference from LMO instances of class 'asset'
to the IETF network inventory tree.";
}
<CODE ENDS>¶
Module ietf-almo-example-mapping-openconfig-platform, includes the mapping between openconfig-platform and ietf-almo-assets, augmenting asset identity:¶
<CODE BEGINS> file "ietf-almo-example-mapping-openconfig-platform@2023-10-23.yang"
module ietf-almo-example-mapping-openconfig-platform {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-almo-example-mapping-openconfig-platform";
prefix ietf-almo-example-map-oc;
import ietf-almo {
prefix ietf-almo;
}
import ietf-almo-assets {
prefix ietf-almo-asset;
}
// For the show case, import statement should be uncommented,
// import openconfig-platform {
// prefix oc-platform;
// }
organization
"IETF OPSA (Operations and Management Area) Working Group";
contact
"WG Web: <https://datatracker.ietf.org/wg/opsawg/>
WG List: <mailto:opsawg@ietf.org>
Editor: Jan Lindblad
<mailto:jlindbla@cisco.com>
Editor: Marisol Palmero
<mailto:mpalmero@cisco.com>";
description
"This YANG module maps the IETF LMO asset concept to the
OpenConfig platform framework.
Copyright (c) 2021 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject to
the license terms contained in, the Simplified BSD License set
forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(https://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX
(https://www.rfc-editor.org/info/rfcXXXX); see the RFC itself
for full legal notices.";
revision 2023-10-23 {
description
"Renamed all references from LMO to ALMO. Refer to
DMLMO draft";
reference
"RFC XXXX: ALMO YANG Model";
}
augment /ietf-almo:almos/ietf-almo:almo/ietf-almo:inst {
when "derived-from-or-self(../ietf-almo:almo-class,'ietf-almo-asset:asset')";
leaf oc-component-ref {
type string;
config true;
// leafref path "/oc-platform:components/oc-platform:component/"
// + "oc-platform:name";
// this is simplified version to show case
description "simplified example to include component reference";
}
description
"This adds a reference from LMO instances of class 'asset'
to the OpenConfig platform tree.";
}
<CODE ENDS>¶
openconfig-platform.yang is not included in the section for simplicity of the output.¶
Once compilation is applied to the YANG modules, the following configuration, considers network element "router2" as a hardware network element, which is described under network-inventory YANG module:¶
network-inventory network-elements network-element 22222 name router2 hardware-rev 1.1 software-rev 17.1 mfg-name cisco serial-number AF123456 product-name ASR1k components component fan part-number 678678 components component psu part-number 654321¶
"router2" asset identity is augmented including attributes from ietf-network-inventory(i.e. rack-equipment-room-ref, rack-ref, network-element-ref, etc) and any other imported YANG module, i.e. openconfig-platform inventory YANG modules, with oc-component-ref.¶
lmo0(config)#lmos lmo asset inst router2 ?
Possible completions:
activation-date age aggregation capture-info component-network-element-ref
component-ref ietf-almo-asset:deployment-mode ietf-almo-feature:features install-location interfaces
licenses network-element-ref number-of-instances oc-component-ref parent
platform-dependency-os rack-equipment-room-ref rack-ref role sign-of-life-timestamp
software-type software-version tags¶
Changes in future versions of DMLMO, might require one unique import statement in the mapping YANG module, from another inventory YANG module.¶